TB6612FNG Dual Motor Driver Module (1.2A H-Bridge DC Motor Driver)

Description

The TB6612FNG Motor Driver Module is a compact and efficient dual H-Bridge motor driver designed to control DC motors and stepper motors with higher efficiency and lower heat generation compared to traditional L298N drivers. Powered by the reliable TB6612FNG IC, it is ideal for robotics, smart cars, automation, and Arduino-based projects.

এই TB6612FNG Motor Driver Moduleটি একটি শক্তিশালী ও কমপ্যাক্ট ডুয়াল মোটর ড্রাইভার, যা DC মোটর ও স্টেপার মোটর নিয়ন্ত্রণে ব্যবহৃত হয়। এটি L298N এর তুলনায় কম গরম হয় এবং বেশি কার্যকর, তাই ছোট ও মাঝারি রোবোটিক্স প্রজেক্টের জন্য এটি অত্যন্ত জনপ্রিয়।

⭐ Key Features

• Original TB6612FNG dual motor driver IC
• Controls 2 DC motors independently
• Supports 1 stepper motor
• Higher efficiency than L298N
• Low heat generation
• PWM speed control support
• Compact lightweight design
• Logic voltage compatible with 3.3V & 5V systems
• Built-in protection circuitry

🎯 Applications

• Arduino robot car projects
• Line follower robots
• Smart automation systems
• DIY robotics projects
• Stepper motor control
• IoT and embedded systems

📦 Package Includes

• 1 × TB6612FNG Motor Driver Module
• Header pins (depending on version)

⚙️ Technical Highlights

• Motor Supply Voltage: 4.5V – 13.5V
• Logic Voltage: 2.7V – 5.5V
• Continuous Output Current: 1.2A per channel
• Peak Current: 3.2A
• Dual H-Bridge output
• PWM frequency support up to 100kHz

🧠 Why Choose TB6612FNG?

• Better efficiency than L298N
• Smaller size and lighter weight
• Ideal for battery-powered robots
• Less voltage drop across motors
• Smooth PWM motor speed control
• Reliable performance for modern robotics

⚠️ Important Notes

• Ensure correct motor supply voltage
• Use external power supply for motors
• Do not exceed current rating without cooling
• Proper wiring required before powering ON

💻 Example Arduino Code (Dual DC Motor Control)

#define AIN1 2
#define AIN2 3
#define PWMA 5

void setup() {
  pinMode(AIN1, OUTPUT);
  pinMode(AIN2, OUTPUT);
  pinMode(PWMA, OUTPUT);
}

void loop() {

  // Motor Forward
  digitalWrite(AIN1, HIGH);
  digitalWrite(AIN2, LOW);
  analogWrite(PWMA, 200);

  delay(3000);

  // Motor Stop
  analogWrite(PWMA, 0);

  delay(1000);

  // Motor Reverse
  digitalWrite(AIN1, LOW);
  digitalWrite(AIN2, HIGH);
  analogWrite(PWMA, 200);

  delay(3000);

  analogWrite(PWMA, 0);

  delay(1000);
}

❓ Frequently Asked Questions (SEO Boost)

Q1: Is TB6612FNG better than L298N?
✅ Yes, it is more efficient, smaller, and produces less heat.

Q2: How many motors can it control?
✅ It can control 2 DC motors or 1 stepper motor.

Q3: Can it work with ESP32?
✅ Yes, it supports both 3.3V and 5V logic systems.

Q4: What is the maximum current rating?
✅ Continuous current is 1.2A per channel.

Q5: Does it support PWM speed control?
✅ Yes, PWM control is fully supported.

TB6612FNG Dual Motor Driver Module for Arduino & ESP32

Buy TB6612FNG dual motor driver module for DC motors and robotics projects. Efficient H-Bridge driver with PWM support for Arduino & ESP32.