Office Pickup Available Sat–Thu, 10 AM–8 PM • Order online before visiting • Use coupon easy5 for 5% off eligible orders.
Cart৳ 0 0

XH2.54mm Straight Pin Male Connector 2 to 10 Pin | JST XH Header

Price range: ৳ 5 through ৳ 25

Quantity Pricing
QuantityDiscountUnit price
1–19StandardSelect an option
20–5010% off—
51+20% off—
Current unit price: Select a variation
✓ Checked componentsQuality-focused sourcing ৳ bKash acceptedMerchant: 01406080260 COD availableSubject to delivery area Technical helpAsk before you order
SKU: 56418 Category:

Description

A solid, polarized plug-in link for your small circuits.

The XH2.54mm straight pin connector is a white nylon-style header with 2.54 mm pitch and vertical pins. Solder it onto your PCB or perfboard, then plug in a matching XH wire housing. It is available from 2 pin to 10 pin, so you can pick the exact size for batteries, sensors, fans, LEDs and motors.

  • 2.54 mm pitch
  • Straight pin
  • 2 to 10 pin

XH 2.54 mm · Straight

XH2.54mm স্ট্রেইট পিন কানেক্টর হলো ২.৫৪ মিমি পিচের একটি সাদা রঙের হেডার, যার পিনগুলো সোজা নিচের দিকে থাকে। এটি PCB বা পারফবোর্ডে সোল্ডার করে ব্যবহার করতে হয়। ২ পিন থেকে ১০ পিন পর্যন্ত পাওয়া যায়। ব্যাটারি, সেন্সর, ফ্যান, LED ও মোটরের তার সহজে সংযুক্ত করতে এবং খুলতে এটি খুবই উপযোগী। এতে ভুল দিকে লাগানো যায় না, তাই কানেকশন নিরাপদ থাকে। মনে রাখবেন, এটি শুধু হেডার। তার ও মেটিং হাউজিং আলাদা কিনতে হবে।

Which pin count do you need?

Pick your use to see a good starting size. This listing comes in 2 pin, 3 pin, 4 pin, 5 pin, 6 pin, 7 pin, 8 pin, 9 pin and 10 pin.

2 pinPlus and minusBest for a battery, DC supply, LED strip, buzzer, small fan or motor.
3 to 7 pinOne pin more than the cell countA 2S pack uses 3 pins, 3S uses 4 pins, 4S uses 5 pins and 6S uses 7 pins. Check your charger or pack wiring first.
4 pinPower, ground and two signalsA common choice for I2C sensors, OLED displays and serial modules.
6 to 10 pinOne neat plug for a whole cableGood for button panels, display ribbons, encoders and multi-sensor boards.

General guide. Always confirm the pin order for your own project.

Specifications

2.54 mmpin pitch
2–10pin options
3 Atypical rated current
250 Vtypical rated voltage
Straightvertical pin type
ProductXH2.54mm connector header, straight pin
Pitch2.54 mm (0.1 inch)
Pin typeStraight (vertical), through-hole soldering
Pin count options2 pin, 3 pin, 4 pin, 5 pin, 6 pin, 7 pin, 8 pin, 9 pin, 10 pin
Housing colourWhite
PolarizationKeyed, so the plug only goes in one way
Typical rating3 A, 250 V per pin for the XH series
Mates withXH2.54 wire housing and crimp terminals (sold separately)
CompatibilityJST XH style, 2.54 mm pitch
MountingPCB or perfboard, solder from the back
In the box1 × XH2.54mm straight pin connector in your chosen pin count

What you can build

One small part, many neat connections.

Battery and balance leads

Add a clean plug-in point for LiPo packs and chargers on your own board.

Sensor boards

Connect I2C and analog sensors with a short cable.

LED and fan wiring

Swap lights and fans without desoldering.

Robots

Plug motors and encoders into a tidy control board.

Custom PCBs

Give your own design standard, polarized connectors.

Repair and replacement

Replace a broken XH header on a module or a charger.

Fit it in five steps

  1. Check the size. Count the pins you need and confirm a 2.54 mm pitch on your board or housing.
  2. Place the header. Push the pins through the holes with the keyed side facing the direction you want the cable to point.
  3. Solder. Solder each pin from the back and trim any extra length. Keep the header flat against the board.
  4. Prepare the cable. Crimp XH terminals onto your wires and push them into the matching XH housing, red wire on the positive pin.
  5. Plug in. Press the housing onto the header until it seats firmly.

Before you use it: this listing is the header only. The wire housing and crimp terminals are separate. Always check the pin order before connecting a battery, because a reversed plug can damage your parts. Ratings are typical for the XH series, so for high current or voltage check your wire gauge and your design.

Questions buyers ask

Is this the same as a JST XH connector?

It is the same XH style with 2.54 mm pitch, so it mates with standard XH wire housings and terminals.

Does it come with the wire plug?

No. You get the straight pin header only. Buy the XH housing and crimp terminals separately.

Which pin counts are available?

From 2 pin up to 10 pin. Choose the pin count from the options on this page.

What does straight pin mean?

The pins point straight down through the board. Right-angle headers have the pins bent at 90 degrees.

Can I use it for a LiPo balance connection?

Yes, many balance leads use XH. A 2S pack uses 3 pins, 3S uses 4 pins and so on. Always match the pin order to your charger.

Do I need to solder it?

Yes. It is a through-hole part, so you solder it to a PCB or perfboard.

Do you deliver outside Dhaka?

Yes, we deliver all over Bangladesh.

Related searches

English: XH2.54 connector price in Bangladesh, XH 2.54mm straight pin BD, JST XH connector Dhaka, XH2.54 2 pin 3 pin 4 pin, LiPo balance connector Bangladesh, XH header male, wire to board connector BD, Arduino shop Bangladesh, robotics shop Bangladesh

Banglish: XH2.54 connector dam koto, XH connector kothay pabo, XH 2.54 straight pin price BD, JST XH kinbo kothay, electronics shop Dhaka

বাংলা: XH2.54 কানেক্টর দাম, XH 2.54 মিমি স্ট্রেইট পিন, JST XH কানেক্টর বাংলাদেশ, ব্যাটারি কানেক্টর, ইলেকট্রনিক্স শপ ঢাকা

Additional information

Pin Number

2Pin, 3Pin, 4Pin, 5Pin, 6Pin, 7Pin, 8Pin, 9Pin, 10Pin

⚙Project Support

Not sure whether this part is right for your project? Our team can help with component selection and integration.

3D3D Print & Fabrication

Need an enclosure, mount or prototype part? Ask about 3D printing and laser cutting/engraving.

LABLab Use Facility

Selected testing, prototyping and lab-use support is available for project teams and students.

Request project support →Open WhatsApp: 01309078343

Frequently Bought Together

🛠️ Change