Office Pickup Available Sat–Thu, 10 AM–8 PM • Order online before visiting • Use coupon easy5 for 5% off eligible orders.
Cart৳ 0 0

XH2.54 Single Head Terminal Wire 2P to 10P, 100mm Pre-Crimped Cable

Price range: ৳ 10 through ৳ 50

Quantity Pricing
QuantityDiscountUnit price
1–19StandardSelect an option
20–5010% off—
51+20% off—
Current unit price: Select a variation
✓ Checked componentsQuality-focused sourcing ৳ bKash acceptedMerchant: 01406080260 COD availableSubject to delivery area Technical helpAsk before you order
SKU: 56418-11 Category:

Description

Ready-made XH cable. Plug one end, solder the other.

The XH2.54 single head terminal wire is a pre-crimped cable with a white XH2.54mm housing on one end and a tinned bare tail on the other. Each wire is 100 mm long. Plug the housing into an XH header, then solder the tinned tail to your board, module, motor or battery lead. It is available from 2 pin to 10 pin, so you skip the crimping work.

  • 2.54 mm pitch
  • 2P to 10P
  • 100 mm wire

XH2.54 · 100 mm · Tinned tail

XH2.54 সিঙ্গেল হেড টার্মিনাল ওয়্যার হলো আগে থেকে ক্রিম্প করা তার, যার এক প্রান্তে সাদা XH2.54 হাউজিং এবং অন্য প্রান্তে টিন করা খোলা তার থাকে। প্রতিটি তার ১০০ মিমি (১০ সেমি) লম্বা। হাউজিংটি XH হেডারে লাগিয়ে অন্য প্রান্ত সরাসরি সোল্ডার করা যায়, তাই আলাদা করে ক্রিম্পিং করতে হয় না। ২ পিন থেকে ১০ পিন পর্যন্ত পাওয়া যায়। ব্যাটারি, সেন্সর, ফ্যান, মোটর ও LED প্রজেক্টে সংযোগ দিতে এটি খুবই সুবিধাজনক।

Which pin count do you need?

Pick your use to see a good starting size. Variants: 2P, 3P, 4P, 5P, 6P, 7P, 8P, 9P and 10P, each 100 mm long. The 2P wire is red and black.

2PRed and black pairBest for a battery, DC supply, LED strip, buzzer, small fan or motor.
3P to 7POne pin more than the cell countA 2S pack uses 3 pins, 3S uses 4 pins, 4S uses 5 pins and 6S uses 7 pins. Check your charger or pack wiring first.
4PPower, ground and two signalsA common choice for I2C sensors, OLED displays and serial modules.
6P to 10POne cable for a whole panelGood for button panels, displays, encoders and multi-sensor boards.

General guide. Always confirm the pin order for your own project.

Specifications

100 mmwire length
2.54 mmpin pitch
2–10pin options
1 endplug on one side
Tinnedtail, easy to solder
ProductXH2.54 single head terminal wire
Pitch2.54 mm
Pin count options2P, 3P, 4P, 5P, 6P, 7P, 8P, 9P, 10P
Wire length100 mm (10 cm)
Plug endWhite XH2.54 housing with crimped terminals
Other endBare wire with tinned tip, ready to solder
Wire colours2P is red and black. Multi-pin wires come in mixed colours and may vary.
Mates withXH2.54 straight or right angle headers
CompatibilityJST XH style, 2.54 mm pitch
Typical ratingUp to 3 A for the XH series housing. Wire current depends on wire gauge.
In the box1 × XH2.54 single head terminal wire in your chosen pin count and 100 mm length

What you can build

Neat, removable connections without crimping.

Battery and balance leads

Make a plug-in lead for LiPo packs and chargers.

Sensor cables

Link I2C and analog sensors to your board.

LED and fan wiring

Add a plug to lights, fans and buzzers.

Robots

Connect motors and encoders to a control board.

Repair work

Replace a damaged XH cable on a module or charger.

Custom harnesses

Build tidy wiring for your own projects.

Use it in five steps

  1. Pick the size. Count the pins on your XH header and choose the same pin count.
  2. Plug in. Push the housing onto the XH header until it seats. It only fits one way.
  3. Prepare the tail. Check the wire colours. Trim a little if the tinned tips are too long for your pad.
  4. Solder. Solder each wire to your board, module or battery lead and match the polarity.
  5. Insulate. Cover the joints with heat shrink tube and test before powering up.

Before you use it: this is a single head cable, so one end is bare wire. The XH header is sold separately. Wire colours are not a fixed standard, so check each pin with a multimeter before connecting a battery. A reversed connection can damage your parts. For high current, check the wire gauge and your own design.

Questions buyers ask

What does single head mean?

Only one end has the XH plug. The other end is bare wire with a tinned tip for soldering.

How long is the wire?

100 mm, which is 10 cm, for every pin count.

Which pin counts are available?

From 2P up to 10P. Choose the pin count from the options on this page.

Does it fit XH headers?

Yes. It plugs into standard XH2.54 headers, both straight pin and right angle types.

Will the wire colours always match the photo?

The 2P wire is red and black. For other sizes, colours can vary, so always check each wire before connecting.

Can I use it for a LiPo balance connection?

Yes, many balance leads use XH. A 2S pack uses 3 pins, 3S uses 4 pins and so on. Match the pin order to your charger.

Do you deliver outside Dhaka?

Yes, we deliver all over Bangladesh.

Related searches

English: XH2.54 terminal wire price in Bangladesh, XH2.54 single head cable BD, JST XH 2.54 connector wire Dhaka, XH2.54 2 pin 3 pin 4 pin wire 100mm, LiPo balance cable Bangladesh, XH connector with wire, pre-crimped XH cable, Arduino shop Bangladesh, robotics shop Bangladesh

Banglish: XH2.54 wire dam koto, XH connector wire kothay pabo, XH 2.54 single head cable price BD, JST XH wire kinbo kothay, electronics shop Dhaka

বাংলা: XH2.54 টার্মিনাল ওয়্যার দাম, XH 2.54 সিঙ্গেল হেড কেবল, JST XH কানেক্টর তার বাংলাদেশ, ব্যাটারি কানেক্টর তার, ইলেকট্রনিক্স শপ ঢাকা

Additional information

Pin Number

2Pin, 3Pin, 4Pin, 5Pin, 6Pin, 7Pin, 8Pin, 9Pin, 10Pin

⚙Project Support

Not sure whether this part is right for your project? Our team can help with component selection and integration.

3D3D Print & Fabrication

Need an enclosure, mount or prototype part? Ask about 3D printing and laser cutting/engraving.

LABLab Use Facility

Selected testing, prototyping and lab-use support is available for project teams and students.

Request project support →Open WhatsApp: 01309078343

Frequently Bought Together

🛠️ Change